Justin Maxwell 2009-12-17 15:34
Hi.
Using Windows display settings, I can see five monitors, and with lots of jiggery, I can do whatI want and switch between 1,2,3,4 & 1,2,4:5 - but can't save the settings to flick between the two of course.
UltraMon profiles seem to only show the first four monitors, is this right? Obviously, one on my graphics cards (Quadro FX 1400) has three outputs, of which any two can be active at any one time.
Is this a glitch (either at my end or the applications), a missing feature that might get included, or as designed?
Cheers,
-Justin
|
Justin Maxwell 2009-12-17 18:13
NB - just for anyone who might suggest it, I've found, installed, and tried "Display Changer", running a detatch in comes back with no error, monitors flicker, but all four monitors remain attached :-(
|
Christian Studer 2009-12-18 08:22
Which version of Windows are you using?
Christian Studer - www.realtimesoft.com
|
Justin Maxwell 2009-12-18 09:30
Not sure how I managed to put this in the wrong forum, thanks for moving it...
I should have mentioned it's on Windows 7 RC,. If it helps at all, I have since found and run the UltraMon 'sysinfo' script on the configs, and the HMonitor value for Monitor 4 changes. While Monitors 1,2,3 are of the form 0x1000#, Monitor 4 is a less trivial value eg: (0x3A0261 or 0x2604BF).
--J
|
Christian Studer 2009-12-19 10:52
Please try this again with the 3.0.8 release (should be ready next week), several issues related to changing display settings on Windows 7 have been fixed there. Let me know if it still doesn't work with 3.0.8.
Christian Studer - www.realtimesoft.com
|
Justin Maxwell 2009-12-19 14:10
Cheers, will do.
|
Justin Maxwell 2009-12-21 13:44
Hi, just tried it - found the menu to adjust the monitor ID numbers... But Ultramon still shows only four monitors, Windows shows five. Images at
http://picasaweb.google.com/lh/photo/67cp1jqO_Curmv9QMpMRSA?authkey=Gv1sRgCK2E5Yeo8dKmxAE&feat=embedwebsite
http://picasaweb.google.com/lh/photo/8nCk7KjNb4TE2zRqZNvQFw?authkey=Gv1sRgCK2E5Yeo8dKmxAE&feat=directlink
Cheers. Let me know if there's any data I can provide that might help.
|
Christian Studer 2009-12-22 00:10
For further troubleshooting please run CcdInfo.exe and EnumDisp.exe and send me the generated log files to support@realtimesoft.com.
Christian Studer - www.realtimesoft.com
|
Christian Studer 2009-12-26 02:12
Thanks for the logs. There's no easy fix for this, but I'll look into adding support for such a setup in a later release, not before 3.0 final though.
Christian Studer - www.realtimesoft.com
|
Boris 2010-01-12 03:35
Hello! I create resolution for my LCD TV. When i applied profile, resolution turn on in 1080i, but i need 720p. In Nvidia control panel 3 my resolution 1)1080i, 1232x688, 25Hz; 2) 720p,1232x688, 50Hz; 3) 720p,1232x688, 60Hz.
I need ยน3. Thank you!
Boris
|
Christian Studer 2010-01-12 09:33
What refresh rate options does UltraMon offer for the 1232x688 resolution?
Christian Studer - www.realtimesoft.com
|
Boris 2010-01-13 00:56
25Hz, 59 Hz, 60 Hz
Boris
|
Christian Studer 2010-01-13 09:47
What happens if you select the 1232x688 resolution with a refresh rate of 60 Hz via UltraMon menu > Display Settings? Does the TV get set to 720p60 mode?
Christian Studer - www.realtimesoft.com
|
Boris 2010-01-14 05:56
Resolution and frequency are set correctly.
Boris
|
Christian Studer 2010-01-14 09:39
Looks like everything should work fine, just use the same resolution and refresh rate settings for the display profile.
Christian Studer - www.realtimesoft.com
|
Boris 2010-01-14 23:41
In profile, I put 60 Hz, but after the application frequency is set at 25 Hz ...
Boris
|
Christian Studer 2010-01-15 01:53
I'm not sure what would cause this, UltraMon Display Settings and display profiles basically work the same way, and apply the display settings the same way.
If you go to UltraMon menu > Display Profiles > Manage Display Profiles, then right-click the profile and select Edit from the menu, is the refresh rate still set to 60 Hz?
Christian Studer - www.realtimesoft.com
|
Boris 2010-01-15 04:56
yes
Boris
|
Christian Studer 2010-01-15 11:40
Very weird, are you sure the settings are exactly the same in UltraMon menu > Display Settings and the display profile? If possible, please send me screenshots of both to support@realtimesoft.com.
Christian Studer - www.realtimesoft.com
|
