|
Post Reply
Lionel Modra 2010-06-07 15:58
I am running UltraMon 3.0.10 (Registered) on Windows 7 Ultimate x64 and see occasional hangs. This often (but not always) occurs when launching another application, and sometimes occurs without me initiating any additional application. While the computer buttons change colour to black, and show a black surround (The symbols on the buttons remain visible). When operating normally the buttons are the same colour as the application title bar, and no surround is visible. These momentary (up to 10 seconds) hangs also occur under Windows 7 Ultimate x86.
Perhaps an interaction with my Antivirus (Vipre Premium) as the hang often occurs while that app is updating definitions, and the system usually stays hung until Vipre has finished updating.
mod
Gigabyte GA-P55-UD4P; 8G RAM; 2*1000G SATA HDD plus 1*500G SATA HDD; Windows 7 Ultimate x64; Office 2010 Professional Plus;
Vipre Premium 4.0.3282; WinPatrol 18.0.2010.0; MalwareBytes 1.46; SpywareBlaster 4.3
|
Christian Studer 2010-06-08 07:55
The UltraMon window buttons will turn black if an application stops responding, but most likely the hang isn't caused by UltraMon. To verify this, check if the application also hangs during startup if UltraMon isn't running.
Christian Studer - www.realtimesoft.com
|
Post Reply
|
