Billy G 2010-12-09 15:05
I have six monitors running 1920x1080P, and have them up and running and they should span to the left. The problem is the placement of monitors, they identify as 4,8,6,7,5,3 and should be 8,7,6,5,4,3. I have tried moving them in settings under the display properties and that did not work. I have moved wiring and different ports on the usb 8 port hub, still comes up the same way.I am running an HP laptop with 6 HP usb-to-dvi adaptors on Win-Xp SP3.
billy g
|
Christian Studer 2010-12-10 07:49
Did you try to position the monitors via Windows Display Properties or via UltraMon (UltraMon menu > Display Settings)?
Christian Studer - www.realtimesoft.com
|
Billy G 2010-12-10 13:36
Windows Display Properties - have not tried Ultra-Mon yet, will try if it will help. thanks fo rthe reply!
billy g
|
Christian Studer 2010-12-11 08:53
Should be worth a try, but you might have the same problem with UltraMon as well.
Christian Studer - www.realtimesoft.com
|
Billy G 2010-12-11 14:49
I am having the same problem with UltraMon also - will un-install then re-install. I will then try adding each monitor 1 at a time, hopefully this will work correctly.Thanks for the reply.
billy g
|
Billy G 2010-12-11 14:51
Sorry - will un-install HP and Displaylink software then use the windows new hardware wizard find the displays one by one, hopefully, and then they might be in the right order.
billy g
|
ecarlson 2010-12-12 03:22
Did you drag the monitors into their correct positions in Windows Display Properties? The numerical order shouldn't matter.
- Eric, www.InvisibleRobot.com
|
Billy G 2010-12-13 14:13
Thanks Chris and Eric; I have tried this but it did not work. I have tried the UltraMon software and it has the same issues. Stuck! Eric see the first post for the problem with the placement.
billy g
|
Christian Studer 2010-12-14 08:48
If you can't change the position of the monitors at all, my guess would be an issue with the driver for the USB video cards.
Christian Studer - www.realtimesoft.com
|
Billy G 2010-12-14 13:29
Un-installed and then let windows new hardware wizard find each adaptor. They all came up as the same monitor number. I would like it to work, and HP support was not able to help.
billy g
|
ecarlson 2010-12-15 15:52
Can't you just re-plug the monitors into the correct video outputs (don't change USB ports) so they are in the right positions?
- Eric www.InvisibleRobot.com
|