socamark 2011-05-19 04:36
Often (but not always) #2 Monitor (but primary) is not recognized when loging into Windows 7 64bit. I must got to Control Panel/Device Manager/Monitor/Scan for hardware changes, then all is fine again. Any ideas?
Mark
|
Christian Studer 2011-05-19 07:17
Maybe an issue with the display driver, if you haven't done this already I would recommend installing the latest drivers for your video card.
Christian Studer - www.realtimesoft.com
|
socamark 2011-06-01 10:02
That was a good idea, and there was an updated driver, but still experiencing the same issue. After login (and monitor hybernation) the primary (but #2) monitor is not recognized. The biggest problem here is that all icons are rearranged each time, although it is possible to re-recognize the monitor from the control panel/device manager/monitors/scan for hardware changes.
ATI Radeon HD 3400 card
Any other ideas?
Thank you!
|
Christian Studer 2011-06-02 07:45
Unfortunately I don't know what else you could try, definitely sounds like some sort of hardware issue though.
As a workaround for the icons issue, you could save/restore icon positions via UltraMon menu > Desktop Icons.
Christian Studer - www.realtimesoft.com
|
socamark 2011-06-28 09:28
Yes, that is what I do, it just gets old after several times per day. The new 3.1.0 update is better with remembering icon positions after restoring monitors via device manager/search for new hardware, but still often looses 2nd (yet primary) monitor after restore from log off. Frustrating.
|
