Post Reply

Forums -> UltraMon™ -> Enable/disable secondary displays
Mike   2014-01-06 20:46
I have 3 displays in this order:
1 2 3

When I disable then enable secondary displays, my displays are in the following order:
2 3 1

My primary display is my center monitor. Is this a bug?
Mike   2014-01-06 20:48
*Windows 8.1
UltraMon 3.2.2 x64
Christian Studer   2014-01-07 15:48
On Windows 7 and later, UltraMon may not be able to determine the correct position for disabled monitors. I would recommend using a display profile instead, you can create those via UltraMon menu > Display Profiles.

Christian Studer - www.realtimesoft.com
Mike   2014-01-08 16:39
It would be nice if ultramon could do that automatically so I didn't have to bind two different keys for the task. eg: if all monitors are enabled, ultramon could create a temp profile when disabling, then load that temp profile when enabling again.
Christian Studer   2014-01-09 14:08
I'll consider that for a future release.

It would be possible to use a script to toggle between the two configurations, this way you could use a single hotkey as before. The script would either disable the secondary monitors, or enable them by running the display profile you created. If you're interested in this let me know.

Christian Studer - www.realtimesoft.com
Forums -> UltraMon™ -> Enable/disable secondary displays

Post Reply