Johnsee 2002-09-05 18:13
Stats as listed above
The S3 Trio is in the first PCI slot and the Geforce is in the AGP. When i get into XP and look in device manager i get this message for the other monitor
The device could not start (Code 10)
HELP!
|
Nite 2002-09-05 19:51
Go into the BIOS, set the PCI as Primary.
(Boot Sequence PCI Card, or something similiar.)
\Nite - "can't rain all the time"
Multi-Monitor Gaming Web
|
Johnsee 2002-09-05 19:52
Already done
It didnt fix it
|
arkenstone 2002-09-10 16:58
I'm using the exact same cards under xp
Same problem
When the pci adapter is set as primary i get a blue box on the agp monitor, but device manager still says code10.
when i'm running the agp as primary, i get no signal on the pci and device manager says code10.
Someone suggest something!
|
arkenstone 2002-09-10 17:35
just got it going
updated 4in1's, bios, and det's and after the reboot it suddenly worked.
(shrug)
|
WarhammerTH 2002-09-22 02:00
i think the s3 trio doesnt work under win xp
|
daniel 2002-09-22 17:49
s3 does work under xp, I was using one in my monitor setup,,,i had to drop it a slot though, it didnt like being directly under the agp card
|
PeCo 2002-09-24 23:09
update the drivers, some detonators dosnt support dual monitor.. try to use the final drivers, new detonators are arrived. try those, i havent problems now and i have the same video cards
www.alkon.com.ar
|
boomzilla8 2002-11-04 17:53
S3 cards do work under XP but so far as i have read there is no S3 card that works as a secondary video device. I am hoping that is wrong but so far it is what i have found.
|
F.B 2002-11-09 13:01
not true... I've had a TNT2 with a S3 Trio 64V+ as a secondary, and it worked sweet...
|
chanpreet 2002-11-13 11:04
i use Mx420 with S3 Trio 64V under windows xp and it works fine under windows xp.
i changed the bios to initialise pci first and has worked fine
|
slprism 2002-11-14 18:53
I have WinXP with SP1.
And i have the same problem with a Gefrorce2 and S3 Trio 64 UV+.
Even if i remove the Geforce card and disinstall Nvidia driver, the S3 gives the same problem (code 10).
So i doesn't depend on AGP card (present or not) but only with S3 Trio card which is bad recognized/installed by WinXp.
Some help will be welcome.
Thanks.
|
To be Frank 2003-06-25 16:23
I'm about to shut down and remove the S3 trio 32/64 piece of s*** and literally throw it out my roach infested 1 bedroom apartment. If anyone wants it, look in alley 2, 57 Avenue, The Bronx NY
|
jyMs 2003-06-26 07:44
i have the same setup.. and i'm getting the same code 10 error.. any help would be appreciated :sadwavey:
|
