|
Post Reply
Mark Pearcy 2002-12-06 04:13
Hi,
I used to be able to run the card at 1152 x 864 x 75Hz on my 2 17'' Ctx monitors, not anymore, and I don't know why. If I set using the ati control panel both monitors to the resolution only 1 changes correctly and the other stays at 1024x768 but you can pan round the whole screen.
Its strange because I used to be able to do it..
Any ideas.?
Lates Ati drivers installed and no help from Ati.
Thanks,
Pls email if you can mark@trisant.co.uk.
|
Matts 2002-12-13 07:30
I have a similar setup (but with 2 x 21") on a radeon 7500. Im assuming its win 2000 / xp you are using.
Go into display properties>settings>advanced.
On the advanced page, choose DISPLAYS tab, and the choose each monitor (2 should show as in use), click on the 'monitor' text, and make sure that use DDC information is NOT checked.
That should take care of it.
|
Post Reply
|
