Post Reply
Paul 2018-11-29 12:54
Hi,
I'm running the latest Ultramon (3.4.1) on a Windows 10 pro
(Microsoft Windows 10 Professional (x64) Build 17134.407 (1803/RS4)) operating system
Using 2 monitors (2 monitors
Current desktop: 5760x2160 (-1920,0 - 3840,2160)
Monitor 1 - U32H85x (primary):
Settings: 3840x2160, 32-bit color, 60 Hz refresh rate
Coordinates: 0,0 - 3840,2160. Workspace: 0,0 - 3840,2100
Video card: NVIDIA GeForce GTX 1080
Device: \\.\DISPLAY2\Monitor0)
Monitor 2 - DELL U2412M:
Settings: 1920x1200, 32-bit color, 59 Hz refresh rate
Coordinates: -1920,227 - 0,1427. Workspace: -1920,227 - 0,1387
Video card: NVIDIA GeForce GTX 1080
Device: \\.\DISPLAY1\Monitor0
When my 1st monitor (the 4k one) goes in powersaving mode (means OFF in my case) on a DisplayPort cable, Ultramon loses the wallpaper profile settings, setting it to Zero, in stead of Default. UltraMonWallpaperChanger also stops cycling wallpapers. I then have to manually set the profile back to "Default".
Do you have any Idea what is causing this behavior , and more importantly, do you know how to fix this ?
Thanks, Paul
|
Christian Studer 2018-11-29 13:57
Most likely another application changes the wallpaper, to check what's set as the wallpaper run regedit.exe and take a look at the WallPaper value under HKEY_CURRENT_USER\Control Panel\Desktop.
If an UltraMon wallpaper is active this would be set to C:\Users\<username>\AppData\Local\Realtime Soft\UltraMon\UltraMon Wallpaper.bmp.
Christian Studer - www.realtimesoft.com
|
Paul 2018-11-29 14:02
This value reads as
C:\Users\User\AppData\Local\Temp\umwp-wallpaper.bmp
I mentioned I had umwp running in the original post.
Don't know how the two interact, and what it should be with both running.
Thanks, Paul
|
Christian Studer 2018-11-29 15:07
I just tested with Ultimate Monitor Wallpaper Autochanger 2.3.1, this is now a standalone tool and doesn't use UltraMon.
UltraMon will show (None) as the selected wallpaper profile if 'UltraMon Wallpaper.bmp' isn't the active wallpaper bitmap, which would always be the case when using UMWP 2.3.1.
Christian Studer - www.realtimesoft.com
|
Paul 2018-11-30 06:12
Thanks Christian,
Good to have this sorted out. Didn't even notice the change to ULTIMATE in umwp :p
Thanks, Paul
|
Post Reply
|