D-Rauck 2003-08-31 07:11
I have a GeForce 3, and 3 other graphics cards. I found one that I can boot my AGP card as primary in the BIOS and the card will function fine in XP. So I am assuming that it does not have to access/use the BIOS on startup to function.
However when I add another card ATI 3D Rage II+, only the 3D rage will function and the other card gets the code 10 device cannot start message. Is this a conflict with IRQ's or anything.
And dont tell me that a card is not supported as secondary by windows because i used each as a secondary card.
And also dont tell me that both PCI cards have to boot up as primary because they dont. I use the AGP as primary and the one PCI card will work fine.
|
