Eli 2004-04-07 22:42
Hello
I encountered problems with dvi through dvi&vga connecter
It seems like the analog monitor not getting signal and stays in standby
I tried to connect two monitors the one on vga works perfectly
The other on the dvi is in save mode
My os detects two monitiros and I can enable the second
Nvidia drivers (latest 56.72) detect the monitors to and I can adjust them
But still the second monitor is blank
Thank you in advance
Eli
Platinium Ti4200 se-p 64mb
Abit is7
P4 2.6
Win xp pro
|
ecarlson 2004-04-08 13:14
What happens if you connect a monitor to the DVI-VGA adapter and leave the other VGA connector empty?
Does your card say it supports DVI-I (as opposed to DVI-D). I have a PNY brand Ti4200 that works fine with 2 CRT monitors connected, but when I tried a CRT with an LCD (analog), the LCD would not work, no matter which port it was connected to. The LCD worked fine if it was the only monitor connected.
- Eric www.InvisibleRobot.com
|
Eli 2004-04-08 17:44
No output from the dvi when single monitor connected
I have not LCD to try
and I almost sure I have not DVI-D
S/U/M/A Platinium Ti4200se -p 64mb
Abit is7
P4 2.6
Win xp pro
|
ecarlson 2004-04-09 02:43
Have you tried the adapter on another card. It could be a bad adapter.
- Eric www.InvisibleRobot.com
|
Eli 2004-04-09 05:58
I tryed another adapter on my card and nothing changed
If I doing a Screenshot using print Screen a geeting the second monitor in the shot
but something stange - my windows detected One screen and in the setting giving me to enable it
but in device manager added two more nonitors
(4 together)
I tried to see if I have somethink on Bios to change-nothing
installed the drivers again - nothing
the problem the it dosnt work even when boot just go to safe mode
so I change the adopter and checked the cables
and it all ok
maybe I give it a try on other motherboard and with lsd
S/U/M/A Platinium Ti4200se -p 64mb
Abit is7
P4 2.6
Win xp pro
|
