Pedros Sanchez 2004-06-17 20:23
I have a problem with operating of graphics system with 3 monitors using 2 graph. cards and OpenGL. I have following configuration of graphics devices:
GeForce FX5200 D-SUB+DVI (AGP) and GeForce4 MX 440 64MB (PCI4).
And system config.:
- AX3S Pro (I815), Win2000 Prof. SP4
I use the picture from the PCI card as a Primary Monitor. And the picture from AGP card is spanned horizontally onto next two monitors connected to the AGP card. I also tried to make the AGP card outputs to be the Primary, but my problem remains.
Three pictures work fine, but not when I launch my OpenGL utility. Then only output(s) from Primary graph. card is(are) available. The secondary device shows only white blank screen(s).
I have tried another older AGP dual card (GeForce2 MX400 TwinView 32MB) and all three pictures were fine in OpenGL mode. I had installed the newest driver (56.72) in all cases. I also tried this configuration on another motherboard P4PE-X (Asus, I845), but with the same results.
Does exist any other combination of present dual AGP and PCI cards, which should work in multimonitor mode with OpenGL?
Thank you for your help!
|
