Mike 2004-10-07 07:15
The first config of this system i had was with an abit ic7 g max2, bfg 5950 and a pny 5500 pci. The sys worked perfectly with no problems on boot or within windows. I upgraded my psu to an enermax 660, pny 6800, and a newer abit ic7 g max3. After doing a clean install of windows i get a resource problem and only the pci card will work. This is almost the same issue another person in the forum had but they were using a 6800gt and removerd 1 card from there system and fixed the issue.As it stands now i have only the 6800 ultra running in the system with no expansion casds and onboard audio turned off. Is there some advice or documentation i can read to understand how to fix this resource issue?
|
ECarlson 2004-10-07 11:13
First step: Make sure your motherboard is running the latest BIOS.
- Eric, www.InvisibleRobot.com
|
mike 2004-10-07 12:23
I checked to make sure just a few mins ago. it is the latest release from abit.
|
ECarlson 2004-10-08 13:40
Step 2: Try the PCI in a different slot. Not sure what to do after that. You might look at these forums to see what other people have done to fix similar situations.
- Eric, www.InvisibleRobot.com
|
