|
Post Reply
J 2005-04-07 14:36
I have an ATI AIW Radeon on AGP.
and I just added a ATI Mach64 on PCI.
Booted the computer with PCI set as pirmary display.
then I get into windows and looked at device manager where I see, after trying to run it, it says...
This device cannot start (Code 10)...
ok, PLEASE help!
|
Seahorse 2005-04-07 20:12
Check whether or not the AGP/PCI are booting as primary in your BIOS. Reversed the option as appropriate. Presume the Mach card is also radeon based. Failing that, you preumably have to run 2 graphics drivers.
unfortunately for you, I'm using 2 x nVidias, so I only need one driver and the AGP card boots as primary for me...
--
Rgds
Mike
Dead-Fish.Com Deep Sea Daddies...
|
Bryan 2005-06-25 13:52
You are getting the "device cannot start" BS because that ATI Mach64 chipset is not compatible with multiple monitors. There is a very short list of cards that are. check out this URL:
http://support.microsoft.com/default.aspx?scid=kb;en-us;307397
that should show you the list, and ATI Mach64 is NOT on it. Rage128, R128 AIW, and Radeon are all for ATI. Hope this helps.
|
Post Reply
|
