|
Post Reply
René 2007-04-16 06:59
I have a plasma tv 1280 x 720 and a 17" montitor 1280 x 1024. I have maded 2 profiles with each resolution, but I only want them to me usen 1 at the time. Now they are like dual view on Nvidia, so If I only want to use the 17" to music I can use that, and if I want to see movie on televison I can look on tv. Now I can change between which is primary, but I would like secondary to be turn off when primary are on and opposite.
I can´t get that to work, then I just turn off the other one, but when I then start Media center on 17" the it open the window on tv screen, and then I can´t use it. Is it possible to have to screens connected with different resolutions and only one at time, maby some hot keys to switch between them?
\René
|
Christian Studer 2007-04-16 09:51
That should work fine, does your display profile both change the primary monitor and disable the secondary?
Christian Studer - www.realtimesoft.com
|
René 2007-04-17 01:07
It kind of work. When I change from the monitor 2 to monitor 1, monitor 2 losing signal and goes black, as I want i to. Then when I go from Monitor 1 back to 2, then Monitor 2 change to (dual view mode) So I get this big desktop insteed of go black. where do I go wrong?
\René
|
Christian Studer 2007-04-17 09:58
Do you have the UltraMon display profile configured to also disable the secondary monitor?
Christian Studer - www.realtimesoft.com
|
René 2007-04-17 23:35
yeah I tried that, still not working. I deleted my two profiles and tried make some new. This time I tried to set my TV as primary, and it work fine first time then it make a duel view after. If I right click on the Ikon and set the secondary to disable then I can´t switch monitor. So Actually I don´t know what to do. I just want to switch between two monitor with different resolution and one at the time.
\René
|
René 2007-04-17 23:51
I don´t know how to make it disable?
When I go to manage profiles, then I set 1 monitor to primary and enable. Then this monitor is alone, Now I load the other profiles and it switch monitor, then I can select manage profiles and do the same. but when I have switch from the primary to secondary and back again then it enable again. I don´t know why?
\René
|
Christian Studer 2007-04-18 09:00
To set this up, select Display Profiles > New Display Profile from the UltraMon menu, then select monitor 1, make sure enabled and primary are checked, then select monitor 2 and uncheck the enabled option.
Now create a second display profile, with everything reversed: monitor 2 is set as primary and enabled, and monitor 1 is not enabled.
You can then switch between profiles by selecting the profile from UltraMon menu > Display Profiles.
Christian Studer - www.realtimesoft.com
|
Post Reply
|
